Contact Us

SHENZHEN NOBLE SMART MANUFACTURING TECHNOLOGY COMPANY LIMITED
TEL: +86-755-27150460
E-mail: sales1@ainoble.com
Address: Building B1, Dongfang Jianfu Dayang Industrial Park, Furui Road, Fuyong, Bao'an District, Shenzhen, Guangdong, China

                                          

ABS Front and Rear Car Bumpers Made by Professional CNC and RIM Service

Project Quick details Why choose Reaction Injection Molding (RIM) Lower your tool costs Complete design freedom Higher strength to weight ratio Improve or eliminate secondary operations No sink marks Lower weight Wide range of physical properties How does Reaction Injection Molding (RIM) Work?...

Project Quick details

Parts applications:

To assemble the bumpers

Material:

ABS

Manufacturing Process:

CNC machining and RIM (reaction injection moulding)

Finish Treatment:

Sand polishing, grey primer painted, gloss black, matt black, electroplating

Difficulties & Highlights:

Big size, easy to get deformed.
Use RIM process to reduce the cost.

Size

Customer’s 3D/2D drawing

Brand name

Noble

Palace of origin

Guangdong, China (mainland)


  1. Why choose Reaction Injection Molding (RIM)

  2. Lower your tool costs

  3. Complete design freedom

  4. Higher strength to weight ratio

  5. Improve or eliminate secondary operations

  6. No sink marks

  7. Lower weight

  8. Wide range of physical properties

  9. How does Reaction Injection Molding (RIM) Work?

Two liquid reactants - polyisocyanate component and resin mixture - are held in separate temperature controlled feed tanks equipped with agitators. From these tanks, the polyol and isocyanate are fed through supply lines to metering units that precisely meter the reactants, as high pressure, to the mixhead. When injection begins and valves in the mixhead open, the liquid reactants enter a chamber in the mixhead at pressures between 1,500 and 3,000 psi where they are intensively mixed by high-velocity impingement. From the mix chamber, the liquid flows into the mold at approximately atmospheric pressure and undergoes an exothermic chemical reaction, forming the polyurethane polymer in the mold. Shot and cycle times vary, depending on the part size and the polyurethane system used. An average mold for an elastomeric part may be filled in one second or less and be ready for demolding in 30- 60 seconds. Special extended geltime polyurethane RIM systems allow the processor to fill very large molds using equipment originally designed for molds with smaller volumes. 

图片74(001).jpg 


                                     Reaction Injection Molding RIM

What can we do for you?

图片4.jpg

Production process:


图片5.jpg

Our Equipment

We take the CNC machining as core technology, meanwhile, we integrate other upstream and downstream resources in our industrial chain to provide service for the customer.
We have 4 five-axis CNC, more than 30 high-speed CNC machining centers, CNC lathes, CNC carved machines, in total we have more than 50 machining equipment.
We are able to provide machining service of CNC milling, turning, engraving, cutting, tapping, drilling, etc.  图片6.jpg

Quality control & After-sale service

Quality control: 
We will provide all documents as you need such as inspection report, material report, etc. To meet your quality requirements of products and parts.
图片7(001).jpg

After-sale service:
If the parts have any quality problems when you got them, no matter it happened when we made them or caused by the delivery, we will try best to help you to solve the problems and take our part of responsibility, so you will be free from worries.

Inquiry