Contact Us

TEL: +86-755-27150460
Address: 2nd & 3rd Floor, Building 4, 4th Zone, Dejin Industiral Park, Fuyuan 1st Road, Heping Community, Fuhai Subdistrict, Baoan District, Shenzhen City, Guangdong Province, China.


High Precision Multifunctional Marking Machine Head Parts CNC Machining

Project Quick details What can we do? Production process: Our Equipment We take the CNC machining as core technology, meanwhile, we integrate other upstream and downstream resources in our industrial chain to provide service for the customer. We have 4 five-axis CNC, more than 30 high-speed CNC...

Project Quick details

Parts applications:Marking machine head parts
Material:Import Aluminum alloy 6061-T6, etc.
Manufacturing Process:High precision CNC turning and milling
Finish Treatment:Spray sand, Black anodic oxidation
Difficulties & Highlights:High precision
SizeCustomer's 3D/2D drawing
Brand nameNoble
Palace of originShenzhen, China (mainland)

What can we do? 

Production process:


Our Equipment

We take the CNC machining as core technology, meanwhile, we integrate other upstream and downstream resources in our industrial chain to provide service for the customer.
We have 4 five-axis CNC, more than 30 high-speed CNC machining centers, CNC lathes, CNC carved machines, in total we have more than 50 machining equipment.
We are able to provide machining service of CNC milling, turning, engraving, cutting, tapping, drilling, etc.


Quality control & After-sale service

Quality control: 
We will provide all documents as you need such as inspection report, material report, etc. To meet your quality requirements of products and parts.

After-sale service:
If the parts have any quality problems when you got them, no matter it happened when we made them or caused by the delivery, we will try best to help you to solve the problems and take our part of responsibility, so you will be free from worries.

1. How to Inquiry?
Just send us an enquiry to our Emails or leave your messages, we will try best to reply with you within 1 hour.
2. What information should I give to you for inquiry?
Please send us your drawings such as PDF , IGS, Step files or samples ,and tell us your detailed requirements such as material ,tolerance, surface treatments and the quantity you need, etc.
3. How I know I can buy the good quality from you?
We will make 100% full inspection and provide the inspection reports.
4. Can I get a sample in advance to check the quality?
Samples are available .We can make samples for you around 7 days, once samples are confirmed, mass production will be arranged immediately after your authorization.
5. How can I know my order are going without visiting your company?
We will make the schedule for each order and send you photos of the machining progress.
6. How long is your delivery time?
Normally it is according to quantity and difficulty of the projects, we will show it in our quotation.
7. How to reduce CNC Machining Costs?
With CNC machining, planning is especially critical. People new to the process may assume that the high level of automation involved will result in quick, cheap, and easily producible parts.  In reality, the cost that goes into simply owning and running a CNC machine means that the cost passed on to you as a customer can skyrocket quickly. Getting your first quote back and learning that a single part may cost hundreds of dollars to make can be a real shock.
There are ways to mitigate costs though—certain factors in part design drive CNC cost more than others. By being aware of these factors early on in your development cycle, you can minimize their presence and begin to chip away at that top dollar price tag.
Reduce Your Material Cost
If you’re going to make any sort of part, you of course need to decide what it will be made out of. Many excellent materials can be machined, each with its own unique set of properties, applications, and costs. The price of different stock materials can vary widely but is usually based on general availability, as well as the difficulty to produce that material in a specific stock type (tube stock or especially thick sheets, for instance).
To give you an idea of the range of costs you might expect when choosing a material, I did a quick McMaster search for 6” x 6” x 1” sheets. While a common plastic like ABS will run you about $17, the same size sheet of PEEK (known for its robustness and dimensional stability) costs just over $300. Similarly for metals, a sheet of 6061 aluminum comes in around $25, 304 stainless steel will run you $140, and precision ground 316 stainless steel sheets each cost a whopping $308!
In general, you should simply choose the cheapest possible material that still fulfills your design requirements. Just doing functional prototyping? Try to stick to cheaper options, like ABS and aluminum. On the other hand, if you’re designing an implantable medical device, you’ll probably be forced to use pricier materials, like stainless steel, due to biocompatibility.  
Check out our CNC materials page to read more on Fictiv’s material offerings for CNC, including a comparison of price range and common applications of each material.
Reduce Setup Time
Besides thinking about what your part will be made from, it is also important to think about how it will be made. Here’s where things start to get a little tricky, as there’s often more than one way to skin a cat—er, machine a part. We’ll start by looking at how design dictates the amount of setup time prior to machining.  
Setup time, which consists of CAM (computer-aided manufacturing) programming, as well as machine setup and part fixturing, is commonly known as non-recurring engineering (NRE) cost. It typically makes up a large portion of a machining bill at the prototyping stage and should be minimized as much as possible.
At Fictiv, all milled parts are produced using either a 2.5-axis, 3-axis or a 5-axis CNC machine. It’s wise to assume your parts will be made on a 2.5/3 axis machine, due to their common availability. With this machine type, aside from the part profile, features can only be machined on one side at a time.
Most parts can be machined in six setups or less, as they are made from a six-sided, prismatic piece of stock material, such as a sheet, bar, or strip, that’s held in place by a vice or vacuum table (or sometimes just double-sided tape!). You should try to reduce this number as much as possible—1 or 2 is ideal—as each setup requires its own CAM program and fixturing step.
Occasionally, your part may have features that require non-standard fixturing, another source of added cost. These types of fixtures are varied enough to warrant a separate discussion, but below are two common ones and the features to avoid if you aren’t willing to shell out the extra dough.
Soft Jaws—parts with complex or organic geometry cannot always be held reliably in a standard vice, so a set of jaws with geometry mirroring the part surface are machined for a better grip.
Sine Bar—parts with features not parallel or normal to stock surfaces, such as a hole at a 30 degree angle, will need to be set up using this device, which allows the workpiece to be held at custom angles.
Increase Quantity to Reduce Unit Cost
The good news about NRE cost, as its name suggests, is that it is non-recurring. That means if you’re making multiples of the same part, the same CAM programming and fixturing can be used over and over, or multiple parts can be cut at once from the same stock piece.
I recommend making more than one of each part, so that your unit cost is lower, but not so many that you’re making unneeded parts.
Reduce Machining Time
The last aspect of cost savings to consider is the actual time it takes to machine your part. For the most part, this is dictated by the two things you’ve already taken into consideration: material and part design.
1. Impact of Material Type
If your functional requirements allow you material flexibility, choosing the most machinable one should save money. In general, harder materials take longer to machine, due to the risk of breaking tools, but there are also exceptions to this rule. A few tips to keep in mind:
Cutting plastics too fast will cause the tool to rub the material, rather than cut it, leaving an undesirable surface finish. Aluminum, though harder than plastics like ABS, is actually slightly easier to machine, although material cost may be a tradeoff.
In the case of steels, the higher the carbon content of the alloy, the harder it is, and the more difficult it is to machine. Try to aim for a low carbon version of an alloy, if possible (e.g., 316L over regular 316). 303 Stainless Steel is the fastest to machine.
Metals containing magnesium or zinc, such as brass, are highly machinable.
stainless steel cnc material
Stainless steel CNC material sample
On our CNC capabilities page, you can see an overview of the machinability of each material.
2. Impact of Part Design
Again, your functional requirements will likely drive part design, but here’s a list of considerations to keep in mind:
Tolerances—Tighter tolerances = higher cost. Fictiv holds all its CNC vendors to ISO 2768 medium, a reasonable standard for prototyping purposes.
Hole size & depth—Deep, small holes are slow to machine accurately and prone to tool breakage. Avoid if possible.
Internal radii—The smaller the radius, the smaller the end mill required to create it. The smaller the endmill, the slower it must machine. Go as big as is practical.
Depth of cut—Like holes, extra deep pockets take a long time to machine and may require special-order tools. Try to go no deeper than 10X your smallest internal radius (5X tool diameter).
Wall thickness—Thin walls require extra care. Fictiv’s recommended absolute minimum is 1.0mm for plastics and 0.5mm for metals.
Undercuts—Certain features, such as O-ring grooves or keyways, can (and often must be) machined with a tool made specially for undercuts. Other than this, it’s not usually a good idea to design a part with overhanging material.
Main Takeaways
There are many considerations that can help minimize CNC machining costs. Remembering every single one of them can be challenging, especially if you’re new to product design and development. To help speed along your planning when you get to this stage, just remember the three overarching cost-drivers you should aim to minimize:
Material costs, including stock size and material worth
Fixturing setups, both in number and complexity
Machining time, by eliminating tricky part features and geometry where possible