Contact Us

SHENZHEN NOBLE SMART MANUFACTURING TECHNOLOGY COMPANY LIMITED
TEL: +86-755-27150460
E-mail: sales1@ainoble.com
Address: Building B1, Dongfang Jianfu Dayang Industrial Park, Furui Road, Fuyong, Bao'an District, Shenzhen, Guangdong, China

                                          

CNC Machined Service of High Balance Aluminum Alloy UAV Propeller

CNC Machined Service of High Balance Aluminum Alloy UAV Propeller

Project Quick details The UAV is an acronym for Unmanned Aerial Vehicle, which is an aircraft with no pilot on board. UAVs can be remote controlled aircraft (e.g. flown by a pilot at a ground control station) or can fly autonomously based on pre-programmed flight plans or more complex dynamic...

Project Quick details 

Parts applications:For UAV take-off
Material:Aluminum alloy, etc.
Manufacturing Process:CNC machining
Finish Treatment:Anodic Oxidation
Difficulties & Highlights:High precision, high balance requirements, thin size
SizeCustomer's 3D/2D drawing
Brand nameNoble
Palace of originShenzhen, China (mainland)


The UAV is an acronym for Unmanned Aerial Vehicle, which is an aircraft with no pilot on board. UAVs can be remote controlled aircraft (e.g. flown by a pilot at a ground control station) or can fly autonomously based on pre-programmed flight plans or more complex dynamic automation systems. UAVs are currently used for a number of missions, including reconnaissance and attack roles. For the purposes of this article, and to distinguish UAVs from missiles, a UAV is defined as being capable of controlled, sustained level flight and powered by a jet or reciprocating engine. In addition, a cruise missile can be considered to be a UAV, but is treated separately on the basis that the vehicle is the weapon. The acronym UAV has been expanded in some cases to UAVS (Unmanned Aircraft Vehicle System). The FAA has adopted the acronym UAS (Unmanned Aircraft System) to reflect the fact that these complex systems include ground stations and other elements besides the actual air vehicles.
Officially, the term 'Unmanned Aerial Vehicle' was changed to 'Unmanned Aircraft System' to reflect the fact that these complex systems include ground stations and other elements besides the actual air vehicles. The term UAS, however, is not widely used as the term UAV has become part of the modern lexicon.
The military role of UAV is growing at unprecedented rates. In 2005, tactical and theater level unmanned aircraft (UA) alone, had flown over 100,000 flight hours in support of Operation ENDURING FREEDOM (OEF) and Operation IRAQI FREEDOM (OIF). Rapid advances in technology are enabling more and more capability to be placed on smaller airframes which is spurring a large increase in the number of SUAS being deployed on the battlefield. The use of SUAS in combat is so new that no formal DoD wide reporting procedures have been established to track SUAS flight hours. As the capabilities grow for all types of UAV, nations continue to subsidize their research and development leading to further advances enabling them to perform a multitude of missions. UAV no longer only perform intelligence, surveillance, and reconnaissance (ISR) missions, although this still remains their predominant type. Their roles have expanded to areas including electronic attack (EA), strike missions, suppression and/or destruction of enemy air defense (SEAD/DEAD), network node or communications relay, combat search and rescue (CSAR), and derivations of these themes. These UAV range in cost from a few thousand dollars to tens of millions of dollars, and the aircraft used in these systems range in size from a Micro Air Vehicle (MAV) weighing less than one pound to large aircraft weighing over 40,000 pounds.
UAV Types
Target and decoy - providing ground and aerial gunnery a target that simulates an enemy aircraft or missile
Reconnaissance - providing battlefield intelligence
Combat - providing attack capability for high-risk missions (see Unmanned Combat Air Vehicle)
Research and development - used to further develop UAV technologies to be integrated into field deployed UAV aircraft
Civil and Commercial UAVs - UAVs specifically designed for civil and commercial applications.
What can we do?

图片4(001).jpg

Production process:

图片5(001).jpg

Our Equipment

We have 4 five-axis CNC, more than 30 high-speed CNC machining centers, CNC lathes, CNC carved machines, in total we have more than 50 machining equipment.
图片6(001).jpg

Quality control & After-sale service

Quality control: 
We will provide all documents as you need such as inspection report, material report, etc. To meet your quality requirements of products and parts.
图片7(001)(001).jpg

After-sale service:
If the parts have any quality problems when you got them, no matter it happened when we made them or caused by the delivery, we will try best to help you to solve the problems and take our part of responsibility, so you will be free from worries.

Inquiry